Aeolus TD-941TB dryer is a fabulous looking and performing pet grooming dryer. A mindfully integrated injection moulding shell is not only light and beautiful but also can ensure zero wind leakage in the high-pressure warehouse. The zero-leakage shell also reduces the noise of the dryer, and the noise of the whole machine is controlled to less than 80 decibels during working, which greatly improves the working environment of the groomer.

Specification:

• Max power: 1800W
• Voltage: 220V
• Blow force: 590 g
• Highest Temperature: 52°C
• Noise: 80 dbA
• Net weight: 4.7Kg

Kit includes:

• Hose: Easy to install, securely stay on the hose
• Narrow Nozzle - The outlet of the flat tip is shaped like a crescent, which concentrates the wind from both sides to the middle, avoiding unnecessary air waste, and is very suitable for quick blow-drying of long and slender parts such as legs and tail.
• Rouble Nozzle - Special tilt treatment is made at the outlet of the round nozzles, which not only meets the requirements of normal blowing, but also it can dry of the abdomen and other parts that are not easy to be directly touched, so as to accelerate the drying speed.

Features:

• Zero Leakage Housing.
• The specially designed integrated injection moulding shell is not only light and beautiful but also can ensure zero wind leakage in the high-pressure warehouse.
• The zero-leakage shell also reduces the noise of the dryer, and the noise of the whole machine is controlled to less than 80 decibels during working, which greatly improves the working environment of the groomer.
• Controllable Heating & Wind Speed
• The wind speed adjustment and temperature adjustment of the CVT can realize the combination of high temperature and low speed, low temperature and high speed, etc. In particular, the high temperature and low speed are very important for the styling pre-treatment of curly coated dogs such as Poodle and Bichon, which are essential functions for straightening hair and preparing for the trimming.
• The fan adopts the "soft start" mode to avoid the impact and prolong the service life;
• There is also a built-in overheating protection switch on the heater element -- providing the above broad functionality while also ensuring safety.
• Special Designed Nozzles
• Based on Bernoulli effect, combined with the latest fluid mechanics technology, innovative research and development of ultra-low temperature nozzle.
• Most similar products on the market are at risk of overheating for nozzle -- high temperatures and high speeds of wind quickly heat the nozzle surface to more than 50-60 degrees Celsius, making it impossible for pet groomers to hold them safely.
• The new ultra-low temperature nozzle has a special double-layer suction structure: when the wind speed in the inner duct is higher and the air volume is greater, the outer duct can accelerate the suction, the cooling effect is proportional to the inner wind flow, so as to ensure that the surface of the nozzle is cooled by air without significant temperature rise.
• Example of measured data: When the ambient temperature is 20℃, after about 5 minutes of continuous blowing, the internal temperature of the blowing nozzle rises to 65℃, while the surface temperature of the blowing nozzle is always within 30℃, which ensures a safe and comfortable holding experience.
• Excellent Insulating Hose & Sleeve
• After a lot of experiments and the results showed when the hose surface shows a temperature at over 64℃s, the nozzle only measures 29.8℃. The heat insulation sheath works very well too, when the inside is 65℃, the outside is only at 38℃, providing safe operation on groomers' arms.

How to care:

• Step 1 – Unplug the dryer, and take out the cap and filter which are located at the rear exterior of the dryer. Use a vacuum cleaner or a big brush to clean the cap and foam filter. You may find the cap and filter accumulated with animal dander, debris, and hair all over it. It has to be cleaned thoroughly.
• Step 2 – Later take the foam filter, scrub and clean it nicely so that the bacteria and odour are gone. Allow it to dry off and fix everything as it is